PRODUCT REVIEW
Aqara Presence Sensor FP300 Review: 5-in-1 Smart Sensor
- Model
- Presence Sensor FP300
- ASIN
- B0FG2MD3YP
Check Current Price
Check current price →PRICE DISCLOSURE
Prices, availability, seller details, subscriptions, and included accessories can change. Confirm the final terms on the seller or manufacturer website. Affiliate links — AIFOLUNE may earn a commission at no extra cost to you.
Based on official product information, documentation, and independent market research. No hands-on testing is implied unless the article explicitly says otherwise.
FP300 targets the problem ordinary motion sensors handle poorly: keeping automations active while someone is sitting still. Its strongest feature is not the sensor count alone, but the choice between Aqara’s richer Zigbee controls and broader Thread/Matter integration—with different features and battery expectations in each mode.
QUICK VERDICT
Choose FP300 for occupancy-aware lighting or climate routines in rooms where people sit still, and only after confirming the required Aqara hub or Thread-enabled Matter controller. Basic hallways and short-pass zones usually do not justify its higher complexity.
BEST FOR
FP300 fits offices, living rooms, bedrooms, reading areas, and bathrooms where stationary occupancy matters. It is especially useful for Home Assistant, Apple Home, Aqara, SmartThings, Google Home, or Alexa users who understand their controller requirements and want multi-condition automations.
MAIN TRADE-OFF
Requires an Aqara hub or Thread-enabled Matter controller
COMPLETE SETUP
Thread mode requires a compatible Thread-enabled Matter controller in the chosen ecosystem. Zigbee mode requires an Aqara hub and the Aqara Home app, but unlocks Aqara-specific configuration. Include the cost of the correct controller, replacement CR2450 batteries, mounting hardware for the chosen package, and the time needed to tune placement and automations.
AT A GLANCE
Key Specifications
- Model: Presence Sensor FP300
- ASIN: B0FG2MD3YP
- 60GHz mmWave plus PIR detection
- Ambient light, temperature, and humidity sensors
- Thread, Zigbee, and setup Bluetooth radios
- 120° field of view and up to 6 m stated range
- Two replaceable CR2450 batteries
THE TRADE-OFFS
Pros and Cons
Pros
- Detects stationary occupancy that basic PIR may miss
- Combines five useful sensing functions
- Battery installation avoids a permanent power cable
- Choice of Zigbee or Thread deployment
- Flexible wall, ceiling, corner, or suitable magnetic placement
Cons
- Requires an Aqara hub or Thread-enabled Matter controller
- Protocol choice changes available features
- Room movement can require tuning
- Ecosystems may expose different sensor capabilities
- More expensive and complex than simple motion sensing
BEST MATCH
Who It’s For
FP300 fits offices, living rooms, bedrooms, reading areas, and bathrooms where stationary occupancy matters. It is especially useful for Home Assistant, Apple Home, Aqara, SmartThings, Google Home, or Alexa users who understand their controller requirements and want multi-condition automations.
THINK TWICE
Who Should Skip It
Skip it for a basic corridor trigger, a single short-duration stair light, or any setup without a compatible hub or Matter controller. Buyers unwilling to tune placement and protocol settings may get more dependable value from a simpler PIR sensor.
THE PRODUCT
Product Overview
Aqara Presence Multi-Sensor FP300 combines 60GHz mmWave radar, PIR motion detection, ambient light, temperature, and humidity sensing in a compact battery-powered unit. Aqara specifies a 120-degree field of view, detection up to 6 meters, two replaceable CR2450 batteries, and selectable Zigbee or Thread operation.
DEEPER LOOK
Detailed Review
Complete setup and ownership cost
Thread mode requires a compatible Thread-enabled Matter controller in the chosen ecosystem. Zigbee mode requires an Aqara hub and the Aqara Home app, but unlocks Aqara-specific configuration. Include the cost of the correct controller, replacement CR2450 batteries, mounting hardware for the chosen package, and the time needed to tune placement and automations.
Zigbee versus Thread
The protocol choice affects features, ecosystem routing, configuration, and battery life. Aqara states up to three years in Zigbee mode and up to two years in Thread mode under its laboratory conditions; actual life depends on reporting frequency, enabled sensors, environment, and connected ecosystem. Zigbee provides Aqara-specific controls, while Thread connects through a compatible Matter controller.
Placement, tuning, and false triggers
Presence sensing is highly dependent on the room. Aim the sensor at the occupied zone, avoid unnecessary coverage through doorways, and test fans, curtains, pets, heating sources, and moving objects. Aqara recommends corner installation at an angle for broad coverage, but a smaller targeted zone may produce better automations than maximum range.
Automation design and reliability
A reliable routine should combine presence with a suitable absence delay and, where useful, ambient light or time conditions. Avoid immediately switching critical devices from a single sensor state. Test what happens after battery replacement, hub restart, network loss, and manual overrides before relying on the automation every day.
How This Article Was Prepared
This editorial review uses Aqara’s official FP300 specifications and protocol table, documented controller requirements, manufacturer battery-test conditions, automation design, complete-system cost, and practical placement risks. It does not claim hands-on testing. Firmware, ecosystem exposure, and availability can change.
OTHER OPTIONS
Alternatives
Aqara FP2 is worth comparing when wired power and room-zone mapping matter. Aqara FP1E or other mmWave sensors may suit simpler presence use, while Philips Hue and conventional PIR sensors remain easier for fast movement-triggered lighting. Compare power, protocol, zones, ecosystem exposure, and placement—not only the sensor count.
COMMON QUESTIONS
Frequently Asked Questions
Does FP300 detect a person who is sitting still?
That is the main purpose of its mmWave and PIR combination, although room layout and tuning still affect results.
Does it work without a hub?
It needs the appropriate infrastructure: an Aqara hub in Zigbee mode or a compatible Thread-enabled Matter controller in Thread mode.
Which mode offers the longest battery life?
Aqara states up to three years for Zigbee and up to two years for Thread under specified laboratory conditions. Real battery life varies.
Are all five sensors visible in every platform?
Do not assume identical exposure. Check the current compatibility table for the chosen protocol, controller, and ecosystem.
Can it ignore fans and curtains automatically?
Adaptive detection can help, but careful placement, sensitivity, range, and absence-delay settings remain important.
Is FP300 suitable for security alarms?
Treat it primarily as an automation presence sensor unless the complete alarm system and manufacturer documentation explicitly support the required security use.
FINAL CHECK
Ready to decide?
Confirm the current configuration, included accessories, seller, and final price before ordering.
KEEP EXPLORING
